huawei mobile broadband e1752 software download

If the auto-run program does not respond, find the AutoRun.exe file in The OS automatically detects and recognizes the new hardware and Installing the USB Stick Management Program Plug the USB Stick into the USB port of your PC.

Operating system (OS) installed on your PC. The procedure for installing the management program depends on the Otherwise, the card as well as your USB Stick may get damaged and theĭata stored on the card may be corrupted. Z Do not remove the microSD or SIM/USIM card when the card is in use. With that of the SIM/USIM card slot and the microSD card is insertedĪccording to the direction as labeled on the microSD card slot. Z Ensure that the beveled edge of the SIM/USIM card is properly aligned Z The microSD card is an optional accessory. Replace the back cover and slide it into place. Insert the SIM/USIM card and the microSD card into theĬorresponding card slots, as shown in the following figure. Slide the back cover to remove it from the USB Stick. Z Cyan, solid: The USB Stick is connected to a 3G+ network. Z Blue, solid: The USB Stick is connected to a 3G network. Z Green, solid: The USB Stick is connected to a 2G network. Z Blue, blinking once every 3s: The USB Stick is registering with a Z Green, blinking once every 3s: The USB Stick is registering with a 2G Z Green, blinking twice every 3s: The USB Stick is powered on. It indicates the status of the USB Stick. Through the strap holes, so that the cap will not be easily lost. You can tie the cap and the USB Stick together by threading a strap It holds a Subscriber Identity Module (SIM)/Universal Subscriber Identity The following figure shows the appearance of the USB Stick. For operation detailsĪbout the management program, see the online help included in the Procedures for preparation, installation, and removal. This manual describes the appearance of the USB Stick, as well as the Thank you for choosing the Mobile Broadband

Huawei mobile broadband e1752 software download